Skip to content

windows - 2. page

How To Enable Data Deduplication In Windows Server 2012 On An Existing Volume

I have a very large RAID 6 array that is used to store movies, tv shows, personal files, and various other things. It’s formatted capacity is about 36TB. Believe it or not, it’s pretty much full. It currently consists of 20x2TB hard drives and I really don’t want to add any more drives to it in its current form. Later this year I’m planning on building a new array to replace it, using fewer 6TB or 8TB drives. The server that manages the array had Server 2008R2 installed. After getting down to the last few gigs of free space it dawned on me, why not install Server 2012 R2 and set up data deduplication. I’ve read some pretty impressive articles online, where people were able to reclaim up to 60% of their storage using the dedup mechanism in Server 2012. So, I went ahead and upgraded. I started poking around and it wasn’t very obvious enabling dedup, so I put this guide together to help you get started.

Enabling Deduplication in Server 2012 R2

First, we need to install the Data Deduplication service. It’s part of File and Storage Services. Open Server Manager, select Local Server in the left side pane, then go to the Add Roles and Features wizard, under Manage.

Screen Shot 2015-05-14 at 1.55.06 PM

Go through the first few windows, and when you get to Server Roles, you need to make sure Data Deduplication is selected, at minimum, under File and Storage Services. This is also a good opportunity to install any other roles or services you might be interested in.

Screen Shot 2015-05-14 at 1.53.02 PM

Click Here To Read The Entire Tutorial!

How to change the MTU in Windows Server 2008 & 2012

When I finally got a Windows Server 2012 image built and deployed on OpenStack, I started having some seriously squirrely problems with networking. I was able to ping and resolve DNS. I was even able to browse network shares on other servers that were well up the chain outside of the virtual environment, but I was unable to actually browse the internet from the Windows Server 2012 instance on OpenStack. I was having no issues with Linux based images.

I immediately suspected MTU as the culprit. I double check my neutron-dnsmasq.conf file to make sure the MTU was set at 1454, via DHCP configuration. It was. So, I checked the MTU settings on the Windows image and it was in fact 1500. For some reason the DHCP option was not having any effect on the Windows image. This is supposed to be addressed by the CloudBase VirtIO driver, allowing the MTU to be set via DHCP in OpenStack environments, but it obviously wasn’t working. You can check your MTU by doing the following:

 

Open an Administrator command prompt.

netsh interface ipv4 show interfaces

 

Screen Shot 2015-04-27 at 7.29.38 PM

 

This will show you your current MTU settings. Pay close attention to the Idx # of the ethernet interface. You will need this information to change the MTU. To change the MTU to 1454 use this command. (you will need to replace the “10” with the Idx for your ethernet interface)

Click here to read the entire tutorial!

Tons and tons of awesome links

I always come across pages, links, and things that I don’t want to forget about, and I want to share with the world. So, I decided to create a post with nothing but links. From time to time I will update this post with new links. I’ve tried to categorize everything as much as possible. Be sure to hit the break below to get the full list. Enjoy!

Web Development – Coding, Design, Templates, Etc.

HTML5 Boilerplate – HTML5 Front-End Template  –  http://html5boilerplate.com/

Initializr – HTML5 Template Generator (Based on Biolerplate)  –  http://www.initializr.com/

Smashing Magazine Freebie Icons  –  http://www.smashingmagazine.com/tag/icons/

1001 Free Fonts  –  http://www.1001freefonts.com/

 

Web Hosting – Control Panels, Web Servers, Modules, Etc.

Kloxo – Fully featured hosting control panel (like directadmin/cpanel)  –  http://lxcenter.org/software/kloxo/

ZPanelCP – Fully featured hosting control panel that supports linux as well as Windows (LAMP)  –  http://www.zpanelcp.com/about/

Click here to keep reading this post